Applent Instruments AT4610, Руководство пользователя

Страница: 20 / 76

20
AT4610/AT4710 User’s Guide
Step 1 Enter <SETUP> Page
Step 2
Touch screen
＆
click or use cursor to select [Channel Color] button;
Step 3 Touch screen function field at right side, click & select color.
TIP
The color for measured data is controlled by [Value Color] in [SYSTEM CONFIG] Page, it is only available when
it is set as Graph Color.
4.2 Channel [ON/OFF]
Users can independently turn off each channel, after turning off, all parameters at current
channel is set as unavailable.
4.3 Input [Type]
Each channel can individually set its input type, due to instrument supports various types of
inputs and each input type varies, DC-V and thermocouple (TC-K, TC-J, TC-E, TC-T, TC-N,
TC-S, TC-B, TC-W, TC-R) adopt 2 terminal method to test, 3-wire RTD adopts 3 terminal
method to test, 4-wire RTD and DC-R adopt 4 terminal method to test, after set input type,
please make sure input terminal is correct.

Steps of setting input type:
Step 1 Enter <SETUP> Page
Step 2 Touch screen & click or use cursor to select [Type] field;
Step 3
Touch screen function key field at right side, click
＆
select Input Type.
Function keys Function
TC-K Thermocouple
TC-J Thermocouple
TC-E Thermocouple
TC-T Thermocouple
TC-N Thermocouple
TC-S Thermocouple
TC-B Thermocouple
TC-W Thermocouple
TC-R Thermocouple
RTD-3W 3 wire PT100 RTD
RTD-4W 4 wire PT100 RTD
Cu50 Copper RTD
DC-V DC Voltage (AT4610 only)
DC-R DC Resistance (AT4610 only)
One key set Set the rest channel’s type the same as this type
TIP
Due to the range and unit of temperature, voltage and resistance is different, the range of these input signal and
upper/lower limit value is independently saved in the internal disk, and they don’t affect each other.
4.4 [Range] Setting
Table 4-1 Range limit of DC voltage (AT4610)