Applent Instruments AT381x Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 134

Applent Instruments AT381x Скачать руководство пользователя страница 2

AT381x User's Guide

2

Safety Summary

WARNING

DANGER: When you notice any of the following abnormal conditions, terminate operation

immediately and disconnect the power cord. Contact Applent Instruments Sales for repair. Failure to do so may
result in fire or potential electrical shock to operators.



Instrument is operating abnormally.



Instrument produces abnormal noise, odor, smoke or flash during operation.



Instrument generates high temperature or electric shock during operation.



Power cord, power switch, or power outlet is damaged.



Impurities or liquids flow into the instrument.

Safety Information

WARNING

DANGER: To avoid possible electric shock and personal safety, follow guidelines in below.

Disclaimer

Users should read the following safety information carefully before starting
to use the instrument. Applent Instruments will not be held liable for any
personal safety and property damage caused by user's failure to comply with
the following terms.

Ground
The instrument

To avoid electric shock hazard, the instrument chassis and cabinet must be
connected to a safety earth ground by the supplied power cable with earth
blade.

DO NOT
Operate in an Explosive
Atmosphere

Do not use the instrument in a flammable or explosive atmosphere, steam or
dusty environment. The use of any electronic device in such an environment
is an adventure for personal safety.

DO NOT
Open instrument enclosure

Non-professional maintenance personnel should not open the instrument
case in an attempt to repair the instrument. The instrument still has charge
after a period of shutdown, which may pose a shock hazard to users.

Do not
Use a damaged instrument

If the instrument has been damaged, its danger will be unpredictable. Please
disconnect power cord and don't use the instrument; do not attempt to
repair it.

Do not
Use an instrument that works
abnormally

If the instrument is not working properly, its danger is unpredictable. Please
disconnect power cord and don't use the instrument; do not attempt to
repair it.

Do not
Use the instrument beyond
instructions specified in this
manual

If out of scope, the protection provided by the instrument will be invalid.

«
1
2
3
4
...
»

Содержание AT381x







































































































































Отзывы:

Нет отзывов