Applent Instruments Anbai AT4808 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 35

Applent Instruments Anbai AT4808 Скачать руководство пользователя страница 27

27

Command Reference

9.

Command Reference

This chapter contains reference information on programming FM8116R with the SCPI commands.



Terminator



Notation Conventions and Definitions



Header and Parameters



Command Reference

This chapter provides descriptions of all the FM8116R's available RS-232 commands which correspond to
Standard Commands for Programmable Instruments (SCPI) command sets, listed in functional subsystem
order.

9.1

Terminator

<NL>

：

The EOI line is asserted by New Line or ASCII Line Feed character (decimal 10, Hex 0x0A

，

or ASCII

‘\n’)

9.2

Notation Conventions and Definitions

The following conventions and definitions are used in this chapter to describe RS-232 operation.
< > Angular brackets enclose words or characters that are used to symbolize a program code parameter or an
RS-232 command.
[ ] A square bracket indicates that the enclosed items are optional.
\n Command Terminator

9.3

Command Structure

The FM8116R commands are divided into two types: Common commands and SCPI commands.
The common commands are defined in IEEE std. 488.2-1987, and these commands are common for all devices.
The SCPI commands are used to control all of the FM8116R's functions.
The SCPI commands are tree structured three levels deep. The highest level commands are called the subsystem
commands in this manual. So the lower level commands are legal only when the subsystem commands have
been selected.
A colon (

:

) is used to separate the higher level commands and the lower level commands.

Semicolon (;) A semicolon does not change the current path but separates two commands in the same message.

Figure 9-1

Command Tree Example

ROOT

COMmand1

COMmand2

COMmand3

COMmand4

COMmand5

«
...
25
26
27
28
29
...
»

Содержание Anbai AT4808




































Отзывы:

Нет отзывов