Applent Instruments Anbai AT4808, Руководство пользователя, Страница: 20 / 35

20
AT4808 User's Guide
Step 3 Use cursor keys to select [0.0] field
Step 4 Use function key to select
Step 5 Function Key Function
INPUT AMEND Input correction temperature value in selected channel, using
numeric key to input data, press [Enter]to end
DELETE
AMEND Delete all the channels correction temperature values
*The same steps to correct other channel values

Steps to One-key Correction
Step1 Press [Setup] to enter <FUNCTION> page
Step2 Press[CORRECTION]to enter <GUEST CALIBRATION> page
Step3 Press function key[A KEY AMEND]
Step4 Use numerical key to input Up Values, press[Enter]to end

Steps to One-key Zero-setting
Step1 Press [Setup] to enter <FUNCTION> page
Step2 Press function key[CORRECTION]to enter <GUEST CALIBRATION> page
Step3 Press function key[A KEY ZERO]
Step4 Function Key Function
YES Delete the current page correction value
NO
Cancel “delete”, exit
CANCEL
Cancel “delete”, exit

Steps to Switch Channel Page
Step1 Press [Setup] to enter <FUNCTION> page
Step2 Press function key[CORRECTION]to enter <GUEST CALIBRATION> page
Step3 Function key[PAGE UP]or [PAGE DOWN]to switch the page
5.4 UDisk
Press [Setup] and then press [U-DISK SETUP] to <UDISK SETUP > page
In this page, you can complete U-disk file settings
Figure 5
‑
4 U-disk Setting Page
5.4.1 [Create File]

Steps to Create New File
Step 1 Press[Setup] to enter[FUNCTION]page
Step 2 Press function key[U-DISK SETUP]to enter <UDISK SETUP> page
Step 3 Use cursor key to select[FILE]field