30, 60,
120 seconds. A message can be deleted by either
an incoming new message replacing older messages or
by turning the receiver off.
(Default 3 seconds, suggested 1-5 seconds)
This determines how much time you need to keep
pressing the monitor/reset button, then it will
automatically switch to Auto Monitor mode.
In the Auto Monitor mode, the pager will monitor the
channel and anything being transmitted will be picked
up by the pager. When the transmission ends, the pager
will automatically turn off the audio.
1. AUTO MONITOR:
* Power ON.
* Keep pressing Reset SW, the Monitor function
begins.
* Auto Monitor Mode: Press Reset SW for 3 seconds
until Green LED flashes.
* Audio Lock on : Press Reset SW for 6 seconds
until Green LED remains on.( 3 seconds or 6
seconds can be changed by re-programming )
2. SQUELCH FUNCTION: In Auto Monitor mode:
* If VP101 detects signals, the speaker is ON.
* If VP101 doesn't detect signals, the speaker is
OFF.
6
●
5
Fix Alert / Audio-Only Volume Control:
When this option is installed, the alert tone volume
is
factory preset (non-adjustable) at the maximum volume
level. Turning the volume control will only change the
voice-message volume level. Note: if you
are using the
earphone, we are not recommending this option.
Push-To-Listen feature:
With this option, the
voice message following the alert tone will not be
heard unless the operator immediately holds down
the RESET button.
Private Message Only feature:
Pagers with this
option installed are capable of receiving only those
messages intended for the individual user. The RESET
button will not allow channel monitoring, and the pager
will automatically reset to the standby mode after a
message is received. If the RESET button is pushed
before the end of a message, the radio returns to
standby and the rest of the message is lost.
Group Call:
With this option, the pager will emit
either the standard alert tone (interrupted tone) or an
additional group-call alert (continuous tone). The
group-call alert indicates that the paging message is
intended for all members of a particular group.
Stored Voice Model Features and Controls:
The alert monitor with stored voice stores up to 2
minutes of voice message. Messages are stored
according to their length. The alert monitor can be
programmed for stored voice fixed message length of
VP
10
1 U
SE
R
’S
G
U
ID
E
VP
10
1 U
SE
R
’S
G
U
ID
E
VP101 USER’S GUIDE
672- 00037- 0
762-00050-0
