Apollo RoadRunner HDX Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 17

Apollo RoadRunner HDX Скачать руководство пользователя страница 16

RoadRunner HDX

™ | Rapid Deployment Kit High Definition Portable Mobile Recording System

10

Troubleshooting

Problem

Possible Solution

No Power



Check power cable connections.



Confirm that there is power at the connection terminals.

No Live Video



Check camera video cable and connections.



Confirm that the camera has power.



Check camera lens settings.

The Recorder has
stopped recording

If hard disk drive is full, delete video or set the Recorder to the Overwrite
Mode. If there is a hard disk error, swap the hard disk.

While upgrading the
system, the Recorder
keeps rebooting and the
upgrade fails.

If the current system version is higher than the upgrade package file
version, reset the Recorder first using the Factory Reset. When using the
Factory Reset, saved settings are lost.

Please contact technical support at: 1-888-AVT-USA1 (425-483-7100) or by email: [email protected] for
additional information and troubleshooting assistance.

System Log Notices

Boot Up

Schedule On

Clip-Copy Duration of Video:

Shutdown

Schedule Off

Clip-Copy Camera:

Restart

No Storage Found

Callback Fail

Upgrade

Storage Wrong Format

Factory Reset

Upgrade Fail

Storage Formatted

ACC: On

Power Failure

Clear All Data

ACC: Off

Time Change

Clear Disk

Key: On

Time Zone Change

Format Disk

Key: Off

Time Sync

Disk Full

Heater On: Local

Time Sync Fail

Disk Config Change

Heater On: Boot Up

Disk Bad

Disk

‘No.’ : ‘serial number’

Shutdown: Low Voltage

Login

Disk

‘No.’ : Removed

Shutdown: High Voltage

Logout

Auto Deletion

Shutdown: Low Temperature

Setup Begin

Search Begin

Shutdown: ACC

Setup End

Search End

Recover from Power Failure: Low

Voltage

Remote Setup Change

Clip-Copy Begin

Recover from Power Failure: High

Voltage

Remote Setup Fail

Clip-Copy End

Camera Upgrade Begin

Setup Imported

Clip-Copy Cancel

Camera Upgrade End

Setup Import Failure

Clip-Copy Fail

Camera Upgrade Failure

Setup Exported

Clip-Copy User:

Camera Upgrade User:

Setup Export Failure

Clip-Copy From:

Camera Upgrade Camera:

Setup Export Cancel

Clip-Copy To:

«
...
14
15
16
17
»

Содержание RoadRunner HDX


















Отзывы:

Нет отзывов