
RoadRunner HDX
™ | Rapid Deployment Kit High Definition Portable Mobile Recording System
4
Chapter 3 — Installation
Rear Panel Connectors
WARNING: IT IS IMPORTANT THAT INSTALLATION BRACKETS AND CABLES DO NOT INTERFERE
WITH ANY OF THE VEHICLE'S CONTROLS AND ALSO DO NOT BLOCK THE DRIVER
’S
VIEW OR REACH. FAILING TO COMPLY WITH THESE WARNINGS COULD RESULT IN AN
ACCIDENT CAUSING SERIOUS INJURY OR DEATH.
Power Port
CAUTION: Make sure the power supply meets the requirement (9 ~ 36VDC,
30A) during operation.
The Rapid Deployment Kit operates on a wide range of vehicles. It accepts
power inputs ranging from 9 to 36 VDC. This allows it to operate on both 12
and 24 volt systems. The Cigarette Lighter Adapter of the provided power
cable includes a 15 AMP fuse to protect the vehicle and Rapid Deployment
Kit from hardware failures.
Network Port
The Recorder can be connected to a network using the 1000Mb Ethernet
connector. Connect an industrial Ethernet cable with an M12 connector to the
Recorder connector. The Recorder can be networked with a computer for
remote monitoring, searching, configuration and software upgrades.