Copyright
©
2018 Aplix and/or its affiliates. All rights reserved.
201810011000mt
MyBeacon® Pro（MB004）
User Manual
Edition 1.3.4
MyBeacon
®
Pro（MB004）is a high-end beacon which is equipped with Bluetooth
®
（Bluetooth Low
Energy）communication module and the feature to prevent unauthorized access or spoofing by using
electronic authentication.
Before You Start
Please prepare 2 AA batteries (Alkaline or NiMH). They do not come with your product package.
How to Use
Open the beacon case and insert batteries by following the + and - signs on the case. After the
batteries are inserted, the LED on the beacon will start to blink slowly and radio signals will be
transmitted. When the LED starts to blink means the remaining battery level gets low and battery
replacement is required. Please refer “Status LED” section below to understand the meanings of LED
blinking patterns.
How to open the Case
Turn the bottom side of the beacon up, you will see a thin groove
between the case body and the back cover. Please insert a coin or
key here and then turn it to open. You could cover the groove by
some cloth to prevent damaging the plastic when opening the case.
Hint: Since there are latches on both sides of the groove, it would be
easier to open if you start opening by releasing from both ends first.
How to close the Case
Push the back cover back to the enclosure (please pay attention to
the direction) until you hear the “Clap” sound.
Beacon transmission data
The factory default values of the radio signals being transmitted by the beacon are as follows.
Settings
Initial values
Measured Power
-63 dBm
output power
0 dBm
Following are the factory default values for testing operational functions. Please use the
configuration app to change the settings of the beacon based on your use case.
Settings
Temporary values
Proximity UUID
B0FC4601-14A6-43A1-ABCD-CB9CFDDB4013
Major
Random value（any number between 1～65535）
Minor
Random value（any number between 1～65535）
Status LED
The status of the beacon could be confirmed by checking the LED in the center of the beacon. The
The groove to open the case
The bottom side
