Aplex ViTAM-1 Series Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 53

Aplex ViTAM-1 Series Скачать руководство пользователя страница 20

ViTAM-1XX Series User Manual

19

Chapter 2 OSD

2.1 AD Board OSD Functions

Auto Adjust Up/Left Down/Right Power

Menu/Entry Power Indicator

Power switch: To turn ON or OFF the power

Shift the icon to the right side or shift it up

Shift the icon to the left side or shift it down

Menu: To enter OSD menu for related icon and item.

Auto Button: One-touch auto adjustment

1.)

Getting into Burn-in Mode

Before setting into a burn-in mode, first disconnect the AC power cord. Then press

(don’t let them go) the

buttons until the AC power cord is connected and the

“RGB” appears on the top left corner of your screen. Now it can be put into the

burn-in mode for changing colors.

2.) Getting Out of Burn-in Mode

Before getting out of the burn-in mode, please first disconnect the AC power cord.

Then press the

button (If not workable, press the

button and don’t let

them go) until the AC power cord is connected. Please don’t let your fingers go until

the AC power cord is connected again and the wording of “RGB” appears on the top

left corner of your screen, and wait for 3 second. Under the non-signal entry

situation, if is seen, exit is thus successfully made.

Cable Not Connected

«
...
18
19
20
21
22
...
»

Содержание ViTAM-1 Series






















































Отзывы:

Нет отзывов