Step 2:
Fill water into the channel at the
top of the Chamber. Fill until water
reaches just above the top row of cubes.
Note:
Pour out any water that overflows
into the upper channel.
USING THE ICE GENIE
™
CUBE MAKER
Step 1:
Insert the Cylinder into the Chamber.
(Make sure the Cylinder reaches the bottom,
creating a seal between the Cylinder and Chamber)
Note:
Feel around the base of the chamber to
see if the cylinder is properly seated.
IMPORTANT SAFETY INSTRUCTIONS:
• Only use Ice Genie™ Cube Maker as described in the manual
• Always store in a clean and dry place
• Ice Genie™ Cube Maker is
top rack
dishwasher safe
• Keep away from extreme heat
• Ice Genie™ Cube Maker is NOT microwave safe
• Made with BPA free material
For more tips and instructional videos, visit:
www.IceGenieTips.com
INSTRUCTION MANUAL
COMPONENTS
Step 1
Step 2
Step 3
Step 3:
Snap the Lid onto the Ice
Genie™ Cube Maker. Place into
freezer until all the water is frozen.
(4-6 hours)
Inner Cylinder
Outer Chamber
Tight Seal Lid
Fill to
this point
Upper
Channel
