manualshive.com logo in svg

Apcon ACI-3144-XR, Руководство пользователя, Страница: 53 / 90

Поделиться
Скачать
Apcon ACI-3144-XR Скачать руководство пользователя страница 53

A54-3144-XR • Rev B

53

APCON, Inc.

ACI-3144-XR Chassis User Manual

Chapter 5. Configure the chassis

Configuration > LAN

n

 IPv6 gateway

The following example sets the LAN1 IPv6 gateway on the chassis.

1. On the 

IPv6 Menu

, press 

DOWN

 repeatedly until the 

LAN1 Gateway

 menu is selected, 

and then press 

ENTER

. The following screen is displayed:

2. To set the desired gateway, use the 

CANCEL

 and 

ENTER

 buttons to position the cursor 

over the first digit you want to change.
• To move the cursor to the right, press 

ENTER

.

• To move the cursor to the left, press 

CANCEL

.

3. When the cursor is positioned over a digit you want to change, press either 

UP

 or 

DOWN

 to increase or decrease the value.

4. When the desired digit is displayed, press 

ENTER

 to confirm the setting and move the 

cursor to the right over the next digit.

5. Repeat the steps above until the desired gateway is displayed.

6. When the desired gateway is displayed, press 

ENTER

 repeatedly until the cursor 

moves all the way to the right and the 

IPv6 Menu

 is redisplayed.

7. To save the gateway address, press 

DOWN

 repeatedly until the 

Save Changes

 option 

is marked on 

IPv6 Menu

, and then press 

ENTER

.

Configuration > Telnet

To access the 

Telnet

 menu, press 

DOWN

 to scroll through the sub-menus on the 

Config Menu until

 

the 

Telnet

 menu is selected, then press 

ENTER

. The following screen is 

displayed: 

Содержание ACI-3144-XR



























































































Отзывы:

Нет отзывов