Apcon ACI-3144-XR, Руководство пользователя

Страница: 25 / 90

A54-3144-XR • Rev B 25 APCON, Inc.
ACI-3144-XR Chassis User Manual Chapter 3. Specifications and compatibility
SD card and USB port
The SD card and the USB slots on the controller panel are reserved for factory use only.
Specialty interfaces
Some blades may offer different connectors and interfaces on the front panel, such as
those on either the ACI-3032-E36-1 Multi-Function blade, the ACI-3033-S14-1
I
NTELLA
S
TORE
II blade, or the ACI-3030-T05-1 Bypass TAP blade. See the respective blade
User Manual for more details.
Status LEDs
This section describes the various LEDs on the hardware that display the operational
status of various components. Also see the W
EB
XR User Manual for status indicators
displayed n the user interface.
Front of the chassis
Following are the status indicators on the front of an I
NTELLA
F
LEX
XR chassis:
Back of the chassis
Following are the status indicators on the back of an I
NTELLA
F
LEX
XR chassis:
For information about status indicators for the chassis and installed blades displayed in
the W
EB
XR interface (as shown in the following example), see the W
EB
XR User Manual .
Component Description
Chassis or Blade
Green
The blade is powered up and ready to make connections.
Amber
The LED blinks as the blade is starting up.
Port TX/RX activity
Green
An electrical or optical signal is being received. Note that
some copper SFPs may or may not display a signal whether
or not a cable is plugged into the port.
Component Description
Controller (for detailed information, see page 76 )
Normal mode Green LED (power on), amber LED solid
Error state
• Solid green , no amber
• Solid green , flashing amber
• Flashing green , no amber
Power supply LEDs display in solid or flashing green or amber , depending
on the
state of the power supply.
AC power See
page 19
for detailed information.
DC power See
page 20
for detailed information.