2018-05-09
- 28 -
9. Warranty
The manufacturer guarantees that the meter parameters will meet the technical requirements listed in the paragraph 2 of this document, if
transport, storage and operating conditions will be followed.
Manufacturer's address:
Apator Powogaz S.A., ul. Klemensa Janickiego 23/25, 60-542 Poznań, Poland
tel. +48 (61) 84 18 101; fax +48 (61) 84 70 192
10.
Appendix A
Fig. 10.1. Electrical wiring diagram.
T1 – supply temperature sensor, T2 – return temperature sensor,
V1 – pulse input/output 1, V2 – pulse input/output 2
Fig. 10.2. Activating the pulse input/output by mean of configuration pins connector.
the jumper is set = pulse output 2 turns into pulse input 2
the jumper is set = pulse output 1 turns into pulse input 1
Connection to wired
communication network
e.g. M-Bus, Modbus etc.
Communi-
cation
module
Battery
Pins connector
pulse
pulse
