HDM2.0-4x4-UHD-II
APANTAC LLC,
10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA
, TEL: +1 503 968 3000, FAX: +1 503 389 7921
6
DNS Server
8.8.8.8
DHCP Client
Disable
TCP Port
5000
Telnet Port
23
HTTP Port
80
Note: Depending upon the network, all related IP, Telnet, and TCP settings will need to be
assigned. Consult your network administrator to obtain the proper settings.
5.5 Telnet
You can operate and configure the matrix via a remote terminal session using Telnet.
Follow the steps as below to log onto the matrix by Telnet session:
1. Switch the DIP Switch PIN 2 to ON for LAN configuration.
2. Connect the matrix’s to LAN port of your network with RJ45 cable.
3. Power on both Matrix Switcher and control PC.
4. Launch a terminal session (command line) on your control PC.
5. Type in the matrix’s IP address as below:
telnet [IP Address]:192.168.0.3
6. Press Enter
Note: Telnet port is 23.
5.6 TCP
For programmer familiar with network communication, you can program your own
TCP/IP application to control Matrix Switcher.
Note: TCP port is 5000.
5.7 Web
1.
Open a Browser on your PC and type in the default IP address
connect the IPM web.
