Apach BAKERY Line L 120, Инструкция по эксплуатации и техническому обслуживанию

Страница: 72 / 126

72
EN
11 TROUBLE SHOOTING
PROBLEM POSSIBILE CAUSES SOLUTION
When the main switch is turned to
the “I” position, the lights on the
control panel do not come on. 1) The machine has been connected
incorrectly.
2) The plug has not been inserted
correctly into the socket.
3) There is a disconnected wire in the
plug.
4) There is a burnt control panel light.
5) The Emergency button has not been
released.
1,2,3) Check the electrical
connection.
4) Replace the light bulb.
5) Release the Emergency button, by
rotating it clockwise.
When the Start button is pressed, the
machine does not start. 1) The mobile bowl cover is open.
2) There is a fault in the safety
microswitches.
1) Close the mobile bowl cover.
2) Replace the microswitches.
Continuous noise.
1) The bearings are no longer efficient.
1) Check and, if necessary, replace the
bearings.
The spiral tool stops.
1) The transmission belts are loose.
2) The transmission belts are worn.
1) Tighten the belts.
2) Replace the belts.
The bowl stops.
1) The transmission belts are loose.
2) The transmission belts are worn.
1) Tighten the belts.
2) Replace the belts.