Apach BAKERY Line L 120, Инструкция по эксплуатации и техническому обслуживанию

Страница: 61 / 126

61
EN
B A
The information concerning the gross weight appears on the outside of the packaging.
Once the outer packing material has been removed, in order to unpack the machine, it is necessary to
remove the 4 screws fastened to the 4 feet of the machine.
All the material used for the packaging can be recycled or disposed of as ordinary urban waste.
Lifting and moving the machine :
a) Lifting the machine with packaging
Before starting, check the total weight of the machine with packaging and then use appropriate
equipment to lift the packed machine. In the case when a fork lift truck is used, the machine must be
lifted by inserting the forks into the pallet.
b) Lifting the machine without packaging
Carefully remove the head cover of the machine.
Position and securely fasten four eyebolts into the four M16 holes inside the mixer head.
Insert a tie-rod with hook into the eyebolts and connect the tie-rods to suitable lifting equipment.
Fastening the machine to the floor:
Note: The floor, especially in the front part (where the carriage is located) must be extremely level. For
safety reasons, the machine feet must be fastened to the floor.
To fix the machine to the floor use 4 expansion inserts of diameter 10-12 mm passing them through the
four holes (A) provided in the machine feet.