AP Expert VT-110, Руководство пользователя

Страница: 72 / 84

Chapter 17: System Monitoring
The water consumption history of the last 48 hours is displayed.
Viewing the Water Consumption History per Head of the Last 48
Hours
The controller has a 60-day water consumption history menu. It can also show you the amount of water
consumed in the last & previous 24 hours.
Using the menu select arrow keys, navigate to Water→Last 48Hr/Hd .
The water consumption history per head of the last 48 hours is displayed.
Setting the Animal Age and Count
Some parameters of the controller can automatically change over time as the animals grow. At the begin-
ning of a batch, you must specify the initial number of animals. You will then be able to adjust the number
of animals as changes occur (mortalities, culled, and marketed animals).
Before You Begin
IMPORTANT: All histories of the controller are reset when a new group starts (for example, the animal
age switches from 0ff to 1 day).
IMPORTANT: The animal age automatically goes to 0 day (Off) when entering in Clean Mode.
1. Using the menu select arrow keys, navigate to Age & Mortality .
2. Set the following parameters:
Age Set the animal age. It can be adjusted from 0 days to 450
days.
New Dead / Culled / Marketed Enter the number mortalities, of culled animals and of mar-
keted animals as it occurs. Once a value is posted, the
parameter displayed on screen automatically goes back to
“0”. The posted value is then removed from the current
animal count and is logged in the respective history menus
(Today & Total Died ,Culled or Marketed history).
Today's Dead / Culled / Marketed The controller displays the number of animals that have died,
that have been culled and that have been marketed since the
beginning of the day. These values cannot be changed.
Total Dead / Culled / Marketed The controller displays the number of animals that have died,
that have been culled and that have been marketed since the
beginning of the batch. These values cannot be changed.
Current Size The current count is automatically adjusted when the number
of mortalities, of culled animals and marketed animals
changes.
Initial Size Specify the initial number of animals in the room.
7-day History (Dead, Culled & Marketed) The controller displays the daily number of dead, culled and
marketed animals for the past 7 days. These values cannot
be modified.
72 890-00081 Expert VT-110