AOTAI ATIG315P, Руководство по эксплуатации

Страница: 11 / 37

10
1-5 Applications
The power source is suitable for mild steel, alloy steel, stainless steel, copper, silver and
titanium welding, and is designed for the following recommended areas:
Electric power, petrochemical construction
Boiler and pressure vessel
Shipyards
Bicycle, fitness equipment, and stainless furniture manufacturing
Nuclear power station
1-6 Warning label
The warning label is affixed on the top of machine.
Fig. 1-6-1: Warning label
2-VERSIONS BRIEFS
The ATIG-P welding machine system consists of welding power, hot wire power, water
cooler, wire feeder and welding torch, it is integrated structure of welding power, hot
wire power and water cooler among them.
● ATIG315/400/500P
Digital control panel. Accurate preset and adjustable parameters. Suitable for thin plate
pulse mode welding. The rated welding current degree is 315A, 400A, 500A for this
series.
● ATIG315/400/500P-C
Digital control panel. Accurate preset and adjustable parameters. Suitable for thin plate
pulse mode welding. The rated welding current degree is 315A, 400A, 500A for this
series. This series can use with remote controller(Analog and digital model).