Step 1: Place the waterproof gasket in the groove position of the lamp arm.
Preparation for installation of the courtyard lamp
Step 2: Put the wire through the arm.
Step 3:Align the hole of bent arm with the lamp body
’
s screw position.
Step 4: Tighten the fixing screw with an inner hexagon wrench.
Product parts include introduction
1
2
3
4
Elastic gasket(3)
Arm(1)
Set screws(3)
Water-proof Gasket
(1)
The Courtyard Lamp
Water-proof Gasket
Arm
The Arm is lying on its side
Groove
The Arm is lying on its side
The Courtyard Lamp
Wire
4# internal hexagonal wrench
Elastic gasket(3)
Set screws(3)
The bend arm upright
The torsion:13-17 N.m
The torsion:13-17 N*m.
Grub screw(4)
