Battery Installation
Strobe Operation
AOI UCS-Q1 Quick User Guide
- 1 -
- 2 -
-3 -
- 4 -
- 5 -
- 6 -
Blue
Blinking
Green
Still
Items Included in the package
b.
Power OFF
a.
Power ON
c.
Standby Mode
d.
Auto Standby
e.
Auto Power OFF
Names of the Parts
2
5
3
4
1
8
Battery Cap
Button
Indicator
Strobe Power Control Knob
Fiber Optic Cable Port
Indicator
1
2
3
Button
Pressure Relief Valve
LED Lights
Strobe Light Emitting Window
1” Ball Mount
4
5
6
7
8
9
10
11
UCS-Q1 Strobe
Strobe Diffuser
Battery Storage Case
(Batteries Not Included)
Silicone Grease (
AOI SIGR-5
)
Spare O-Rings x 2pcs for
Battery Compartment
1
2
3
4
5
O-Ring Remover /
White Balance Card (
AOI ORR-01
)
Micro-Fiber Cleaning Cloth (
AOI MC-01
)
AOI Logo Sticker
Quick User Guide
6
7
8
9
7
6
9
10
9
11
3
4
5
8
9
6
2
1
7
1
SEC.
1
SEC.
18650
18650
Thank you for your purchase of AOI Ultra Compact Strobe Q1. Please read this
Quick User Guide prior to use. It will provide an overview of how the UCS-Q1
strobe can be used for optimal performance. For any additional information,
please consult your local dealer or write to
1 x
f.
LED Lights Control Button
LED
Lights Off
25%
Power
50%
Power
100%
Power
When UCS-Q1 is Power ON, press Button
to switch through LED Lights modes.
Battery Polarity “+” must be a protruding type otherwise it will
cause contact failure.
When the Strobe Power Control Knob is at STBY position, the UCS-Q1 is in
Standby Mode. Strobe charging is suspended and flash cannot be triggered.
The LED lights can be operated.
If the Strobe Power Control Knob is not at STBY position and the strobe has not
been activated more than 15 minutes, UCS-Q1 will go into the Standby Mode
automatically. Operating any button, knob or strobe trigger will reset UCS-Q1
from Standby Mode.
If UCS-Q1 is not activated more than 2 hours, it will Power Off automatically. To
turn the strobe back on, the process of Power ON need to be repeated.
