background image

 

Small accessories 

Keep small accessories out of children’s reach. 

 

 

Antennas 

If an outdoor antenna is installed, follow the precautions below. Keep 
an outdoor antenna away from high-voltage feeder lines or other 
streetlamp or power circuits or in places that may come in contact with 
power lines or circuits of such kind. 
When installing an outdoor antenna system, do not touch these power 
lines or circuits. The consequence may be fatal. 
The antenna system must be grounded to prevent surges or built-up 
static charges. 

 

 

 

Antenna grounding according to the National Electrical Code 

Caution for CATV system providers: CATV system providers shall 
follow the NEC Section 820-40 where the proper grounding principles 
are specified; particularly that cables must be grounded to the 
building’s grounding system and kept as close as possible to the 
antenna lead-in point.   
 

Batteries

     

y

 

Do not dispose of batteries in the fire. 

y

 

Dot not short-circuit, disassemble or overheat batteries. 

y

 

Incorrect replacement of batteries may cause the risk of battery 
explosion. Always replace with batteries of the same or equivalent 
type. 

Disposal of used batteries 

Dispose of used batteries according to local laws and regulations to 
protect our environment. 

 

Cleaning  

Cleaning the AC power plug

 

Unplug the AC power cord to clean the plug regularly. If too much dust 
is deposited on the plug, it will absorb moisture, which reduces 
insulation performance and may lead to a fire. 
 

Clean the TV screen and enclosure

 

y

 

Unplug the AC power cord from the outlet to prevent electric shock 
during the cleaning process.   

y

 

Clean the TV enclosure with a soft dry cloth. Wipe off the dust on 
the screen gently with a soft cloth. Remove stubborn stains with a 
soft cloth dampened with mild soapy water. Never use strong 
solvents, such as thinner or benzene to clean the screen or 
enclosure.  

y

 

When cleaning with a chemically pretreated cloth, follow the 
instructions on the package . 

y

 

Dust may accumulate at the ventilation vents over time. Therefore, 
users are recommended to remove the dust at ventilation vents with 
a vacuum cleaner regularly (once a month) to ensure good 
ventilation. 

 

 

 

Magnetic interference 

The speakers equipped on this TV contain a strong magnet which 
generates a magnetic field. Keep objects that may interfere with 
magnetic fields away from the TV speakers. 
 

 

 

Sound 

If a snapping or popping sound is often heard from the TV when in use, 
disconnect the power supply of the TV and consult your dealer or 
service personnel. It is normal that snapping or popping sounds are 
heard occasionally from the TV, particularly when turning the power on 
and off. 

 

 

Grounding clamps 

Power service grounding electrode system

Electric service equipment 

Grounding clamps 

Ground conductors 

Antenna discharge unit Antenna

Antenna lead-in wire Antenna 

Содержание T2242we




























Отзывы: