background image

24

Englis

h

Troubleshooting 

Condition

Explanation / Solution

No picture

No picture

Check the Power Saving settings. 

Cannot receive any channels

Make sure the power cord is connected securely. Turn on the power of the TV. 

Check antenna/cable connections. Make sure the Cable setting is correct for your TV signal source. 

TV is locked to one channel

Perform Auto Program to add receivable channels that are not present in the TV’s memory.

Cannot receive or select

Perform Auto Program to add receivable channels that are not present in the channels TV’s memory. 

To receive or select cable channels, make sure that Cable in the Channel settings is set to On. To 

receive or select UHF channels over an antenna, make sure Cable is set to Off. 

The TV turns off

Check if Sleep Timer is activated, or confirm the Duration setting of Timer automatically.

Check PC Power Management in General Settings.

No picture from some video

Check the connection between the optional video equipment and the TV Sources. 

Press INPUT on the remote control.

Select your desired input from the External Inputs list.

Poor picture

The quality of the images is not 

as good as what I saw at the 

store

Picture quality depends on the signal content. See Quick Start Guide (supplied) to display the best 

possible picture for that signal. 

Double images or ghosts

Check antenna/cable connections.

Check the antenna location and direction. 

Only snow and noise appear on 

the screen

Check if the antenna is broken or bent; Check if the antenna has reached the end of its serviceable life. 

(3-5 years in normal use, 1-2 years at the seaside.)

Dotted lines or stripes

Keep the TV away from noise sources such as cars, motorcycles, or hair-dryers.

If using 300 ohm twin lead, move the excess lead away from the TV or try using 75 ohm coaxial cable 

instead.

No color/Dark picture/Color is not 

correct/The picture is too bright

Press PICTURE to select the desired Picture Mode; Adjust the Picture Mode options in the Picture 

settings.

Noisy picture

Make sure that the antenna is connected using a 75-ohm coaxial cable. 

Keep the antenna cable away from other connecting cords. 

To avoid TV interference, make sure to use an undamaged antenna cable.

No sound/Noisy sound

Good picture, no sound

Check the volume control. Press MUTE or VOL + so that 

 

disappears from the screen.

Disconnect your headphones. 

For HDMI equipment, confirm that the audio output setting of the connected equipment is set to PCM. 

This TV's HDMI inputs support PCM 32, 44.1 and 48 kHz.

Audio noise

Make sure that the antenna is connected using a 75-ohm coaxial cable. 

Keep the antenna cable away from other connecting cords. 

To avoid TV interference, make sure to use an undamaged antenna cable.

PC Input

No Picture / No Signal

Confirm the PC is correctly connected to the TV with either the PC IN (with an HD15 cable) or with the HDMI IN. 

Ensure the output signal from the PC is one of the formats listed on page 15. 

Turn the PC off. Confirm the PC connection and restart the PC. Plug and play will auto-detect the TV 

and correctly set up PC timing. 

Verify PC Power Management is activated.

Poor Picture

Adjust the resolution. Adjust Pitch and Phase.

Suddenly the picture gets smaller

The picture gets smaller during the commercials, this is due to the method the provider broadcasts their 

contents. When HD content channels switch to SD definition content (commercials), the picture may be 

small with a black border.

“Black box” on screen 

You have selected a text option and no text is available. To turn off this feature, set the CC Display 

option to Off. If you were trying to select closed captioning, select CC1 instead of Text1-4. 

Black bands appear at the edges 

of the screen 

Some wide screen programs are filmed in aspect ratios that are greater than 16:9 (this is especially 

common with theatrical releases). Your TV will show these programs with black bands at the top and 

bottom of the screen. For more details, check the documentation that came with your DVD (or contact 

your program provider). Programs in 4:3 aspect ratio will have bands on left and right sides of the 

screen.

Condition

Explanation / Solution

PC Input

Certain programs on DVD or 

other digital sources display a 

loss of detail, especially during 

fast-motion or dark scenes 

This is due to the digital compression of the source content used by certain digital broadcasts and 

DVDs which may cause your TV’s screen to display less detail than usual, or cause artifacts (small 

blocks or dots, pixilation) to appear on your screen. These signal compressions are more visible and are 

dependent on the clarity and resolution of the television. 

Remote control does not operate

Check the polarity of the batteries or replace the batteries. 

Point the remote control at the remote control sensor located at the front of the TV. 

Fluorescent lamps can interfere with your remote control operation; try turning off the fluorescent lamps. 

Keep the remote control sensor area clear from obstacles.

Содержание LE32A0321





























Отзывы: