AOC ADDARA LE22K097, Руководство по обслуживанию

Страница: 35 / 114

35
4. Enter factory mode menu: press MENU + Numeric keys 1999”.
Alignment:
1. Apply Flat pattern (80% white pattern).
2. Set color temperature to “NORMAL”.
3. At factory mode menu, adjust the Scaler R Gain, Scaler G Gain, Scaler B Gain values to meet “NORMAL” color coordinates specification below. Then store those values to NVM
4. Set color temperature to “COOL”.
5. At factory mode menu, adjust the Scaler R Gain, Scaler G Gain, Scaler B Gain values to meet “COOL” color coordinates specification below. Then store those values to NVM
6. Set color temperature to “WARM”.
7. At factory mode menu, adjust the Scaler R Gain, Scaler G Gain, Scaler B Gain values to meet “WARM” color coordinates specification below. Then store those values to NVM
Color temperature Normal/Warm/Cool (x, y) co-ordinates specification:
`
Table 5: Reading with Knoica Minolta CS-200.
Note:
Use Knoica Minolta CS-200 for color coordinates and luminance check.
For suitable mass production at factory, colour analyzers CA-210 can be applied. But, befor measureing ,all CA-210 should be coordinates and proofread with a Charoma Meter (CS-200) or equivalent instrument and a reference TV set.
Check the luminance at the center of the screen with 100% White. And to set Brightness control at 100; Contrast control at 100.
Luminance > 200cd/m2 (Typ.) [ For LE19K097/LT19Z6 only at color temp.- *warm mode ]
> 200 cd/m2 (Typ.) [ For LE22K097/LT22Z6 only at color temp.- *warm mode ]
> 250 cd/m2 (Typ.) [ For LE24K097/LT24Z6 only at color temp.- *warm mode ]
The defult values of Scaler R Gain, Scaler G Gain, Scaler B Gain are all 128. When panel WD is made adjustment, the three values could not be over 128. That is preventing color saturation after adjusting Contrast and Brithness setting at main menu.
Picture Mode x y
Normal (9000oK) 0.289±0.003 0.291±0.003
Cool (12000oK) 0.272±0.003 0.277±0.003
Warm (6500oK) 0.314±0.003 0.319±0.003