AOC A2272PW4T, Руководство пользователя

Страница: 47 / 72

47
8. Select your monitor model and click on the “ Next ” button.
9. Click “ Close ” “ Close ” “ OK ” “ OK ” on the following screens displayed in sequence.
Windows 2000
1. Start Windows
®
2000.
2. Click on the “ Start ” button, point to “ Settings ”, and then click on “ Control Panel ”.
3. Double click on the “
Display
” icon.
4. Select the “ Settings ” tab then click on “ Advanced... ”.
5. Select “ Monitor ”.
- If the “ Properties ” button is inactive, it means your monitor is properly configured. Please
stop installation.
- If the “
Properties ” button is active. Click on “ Properties ” button. Please follow the steps
given below.
6. Click on “ Driver ” and then click on “ Update Driver... ” then click on the “ Next ” button.
7. Select “
Display a list of the known drivers for this device so that I can choose a
specific driver ”, then click on “ Next ” and then click on “ Have disk... ”.
8. Click on the “ Browse... ” button then select the appropriate drive F: (CD-ROM Drive).
9. Click on the “ Open ” button, then click on the “ OK ” button.
10. Select your monitor model and click on the “
Next
” button.
11. Click on the “ Finish ” button then the “ Close ” button.
If you can see the “ Digital Signature Not Found ” window, click on the “ Yes ” button.
Windows ME
1. Start Windows
®
ME.
2. Click on the “ Start ” button, point to “ Settings ”, and then click on “ Control Panel ”.
3. Double click on the “ Display ” icon.
4. Select the “
Settings
” tab then click on “
Advanced...
”.
5. Select the “ Monitor ” button, then click on “ Change... ” button.
6. Select “ Specify the location of the driver (Advanced) ” and click on the “ Next ” button.
7. Select “ Display a list of all the drivers in a specific location, so you can choose the
driver you want ”, then click on “ Next ” and then click on “ Have Disk... ”.
8. Click on the “ Browse... ” button, select the appropriate drive F: (CD-ROM Drive) then click on
the “ OK ” button.
9. Click on the “ OK ” button, select your monitor model and click on the “ Next ” button.
10. Click on “ Finish ” button then the “ Close ” button.