PA-280W User Manual
ACT-280PA-USR-DOC-V1.3, 07/11/2018
Page 10 of 24
2 Specifications
Environment
Operation Temperature:
-10
o
C ~ +60
o
C (+14
o
F ~ +140
o
F)
Operation Humidity:
20 % ~ 90 % (non-condensing)
Atmospheric Pressure:
86 kPa ~ 106 kPa
Power Supply
Voltage:
90 ~ 300 VAC
Frequency:
47 ~ 63 Hz
Others
Frequency:
473 MHz ~ 794 MHz
VSWR:
≤ 1.5
Shoulder Level:
≥ 36 dBc (after pre-correction)
Power consumption (full power): 1760 W @ 360 W output (8 A/220 V)
PA Size: 480mm(W)*178mm(H)*570mm(L)
Controller Size: 480mm(W)*89mm(H)*444mm(L)
Gross Weight: 113 LBS
Note
1)
The electrical interface characteristics are measured at rated power. Values may change.
2)
Operating in abnormal conditions may result in damage to the equipment. Long operating hours in
severe environments may reduce the reliability of the entire system, which may cause permanent
damage to equipment. Make sure all electrical interface characteristics and environmental parameters
are within the defined range listed above before operating this equipment.
