ANYTEC 750 SPD CLASSIC, Руководство пользователя

Страница: 86 / 90

6. MAINTENANCE __PAGE 78
• If your boat is stored outside or in a humid place during the winter, remove
electronic instruments, the textiles, the canopy, cushions, seats and other
equipment that may corrode or become mouldy in moist conditions, and store it
in a dry place.
• Spray the electrical connectors with a suitable moisture repellent antioxidant.
• *Remove batteries and store them in a warm and dry place. Charge them at least
twice during the winter. Spray the electrical connectors with a suitable moisture
repellent antioxidant.
• Check conditions of anodes (see chapter 6.2.3). Replace if needed. Clean the
surface between anodes and hull to ensure good metallic contact. Never paint
them.
• *Cover your boat so that snow and water will not gather inside. Always make
sure that there is enough ventilation and avoid direct contact between the boat
and the covering material/canvas as it may damage the boat due to friction and
oxidation.
6.4.2 Measures after winter storage
• Check the engine owner’s manual and carefully follow the instructions.
• *Reinstall freshly charged batteries and check the voltage.
• Refuel the boat.
• *Install any electronic instruments, textiles and other equipment that was
removed before winter storage. Test them after installation or at first time in the
sea before leaving the shore.
• Reinstall bottom drain plug, tighten carefully .
• Check the condition of the hull including strong points/cleats. Repair damages
directly. Refresh antifouling paint if it has been used before, or consider adding
new paint if the boat is moved to new waters.
• Inspect and test petrol, diesel and gas systems including hoses and connectors
(engine, any optional heater, stove or similar). Check for any signs of wear & tear
and leakage (leaks, stains, smell).
• Inspect fire extinguisher as per separate owner’s manual.
• Carry out maintenance and functional tests on other accessories and equipment
as described in this chapter and the respective OEM manuals.
• Pay extra attention to the condition and function of safety and manoeuvring
equipment like steering system, bilge pumps, emergency switch function,
electrical systems, the function of instruments, MOB/ladder function, condition
of seals at doors and hatches, navigation lights.