manualshive.com logo in svg

Anybus CompactCom 40 EtherNet/IP, Сетевое руководство

Поделиться
Скачать
Anybus CompactCom 40 EtherNet/IP Скачать руководство пользователя страница 187

Doc.Id. HMSI-27-212

Anybus CompactCom 40 EtherNet/IP
Doc.Rev. 1.5

Appendix A

A. Categorization of Functionality

The objects, including attributes and services, of the Anybus CompactCom and the application are di-
vided into two categories: basic and extended.

A.1 Basic

This category includes objects, attributes and services that are mandatory to implement or to use. They 
will be enough for starting up the Anybus CompactCom and sending/receiving data with the chosen 
network protocol. The basic functions of the industrial network are used. 

Additional objects etc, that will make it possible to certify the product also belong to this category.

A.2 Extended

Use of the objects in this category extends the functionality of the application. Access is given to the 
more specific characteristics of the industrial network, not only the basic moving of data to and from 
the network. Extra value is given to the application.

Some of the functionality offered may be specialized and/or seldom used. As most of the available net-
work functionality is enabled and accessible, access to the specification of the industrial network may be 
required.

Содержание CompactCom 40 EtherNet/IP







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды