manualshive.com logo in svg

Anybus Communicator - CANopen, Руководство пользователя

Поделиться
Скачать
Anybus Communicator - CANopen Скачать руководство пользователя страница 21

CAN Network Communication   

16

Doc.Id. SCM-1200-121

Anybus Communicator CAN to CANopen
Doc.Rev. 1.00

4.2.2 Produce and Consume

When using these messages, there is no master-slave relationship between the Communicator and the 
nodes on the subnetwork. Any node, including the Communicator, may spontaneously produce a mes-
sage. The message is sent on the network. The nodes on the network listen to all traffic and decide in-
dependently which messages to consume (read). Nodes do not have to respond to messages, nor do they 
have wait for a query to send a message on the network. 

In the figure above, the Communicator ‘consumes’ data that is ‘produced’ by a node on the subnetwork. 
This ‘consumed’ data can then be accessed from the higher level network. This also works the other way 
around; the data received from the higher level network is used to ‘produce’ a message on the subnet-
work to be ‘consumed’ by a node.

Note

: When configuring the Communicator using the Anybus Configuration Manager, ‘produce’ and 

‘consume’ are defined from the Communicator’s perspective. 

4.3 Protocol Building Blocks

The following building blocks are used in Anybus Configuration Manager to describe the subnetwork 
communication. How these blocks apply to the two modes of operation will be described later in this 
document.

• Group

A group in the Anybus Configuration Manager does not represent any special device on the CAN 
network. It is a means to structure the transactions that are defined for the Communicator. Each 
group can be associated with a number of transactions, see below.

• Transaction

A transaction consists of one or more CAN frames. Each transaction is associated with a set of 
parameters controlling how and when to use it on the subnetwork. There are three kinds of trans-
actions: produce, consume and query-response. A group can contain transactions of all three 
types. A total of 128 transactions can be configured.

• CAN  Frames

The CAN frames are low level entities used to compose transactions (see above). Each frame 
carries an 11-bit or 29-bit identifier and can hold up to 8 bytes of data. See “Configuration of 
CAN Frames” on page 33. A total of 256 CAN frames can be configured. 

Node 1

Node 2

Node 3

Subnetwork Devices

Control System

 Communicator

Содержание Communicator - CANopen



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды