Anvil POA2001 R01, Установка, эксплуатация и уход, Страница: 4 / 8

1. This conveyor pizza oven has been specifically designed for the
continuous baking of pizzas or similar product. It can also
be used for a variety of other cooking functions, such as melting
cheese and reheating frozen dishes.
2. Before operating this unit thoroughly clean as described in the
cleaning section of this leaflet.
3. Position the unit in the desired location and unfold the discharge
and loading platforms as detailed below :-
THESE INSTRUCTIONS MUST BE FOLLOWED FOR US TO
GUARANTEE OUR FULL SUPPORT OF YOUR CLAIM FOR
PROTECTING AGAINST LOSS FROM CONCEALED DAM-
AGE. THE FORM FOR FILING SUCH A CLAIM WILL BE
PROVIDED BY THE CARRIER.
UNPACKING
Unpack the product and check for any damage incurred during
transit. This should be reported to the responsible carrier, railway or
postal authority, and a request for a damage report should be made.
GENERAL INSTALLATION AND OPERATION INSTRUCTIONS
It is advisable to keep these platforms in the closed position when the
unit is not in use. The unit is provided with adjustable flaps either
side of the heating chamber. These should be adjusted to allow the
product to be baked or cooked easy access into the heating chamber.
Obviously, the bigger the gap the bigger the heat loss, so it is advis-
able to keep the distance to a minimum.
Part
No.
1 CONVEYOR BELT
2 CONVEYOR BELT SUPPORT
3 350W ELEMENT 230V
4 SIDE TRAY
5 THUMB SCREW
6 SLOT ADJUSTER PLATE
7 BEARING HOUSING
8 BEARING
9 PLAIN WHEEL AND SHAFT
10 SMALL CRUMB TRAY
11 INNER AND OUTER ASSEMBLY
12 PC BOARD AND RELAY BRACKET
13 FRONT INSULATING PANEL
14 CONTACTOR
15 SOLID STATE RELAY (40A)
16 TEMPERATURE CONTROL PC BOARD
17 MOTOR SPEED CONTROL PC BOARD
18 COOLING FAN
19 FRONT PANEL
20 FAN GRID
21 FACIA
22 ANVIL AXIS LOGO
23 ADJUSTABLE FOOT
24 BOTTOM PLATE
25 LARGE CRUMB TRAY
26 DRIVE GEAR WHEEL
27 DRIVE AXLE
28 DRIVE SPROCKET
29 MOTOR SPROCKET
30 GEARED MOTOR
31 DRIVE CHAIN
32 CHAIN GUARD
33 CERAMIC CONNECTOR BLOCK
34 BACK INSULATING COVER
35 BACK PANEL
36 400W ELEMENT 230V
DIGITAL PIZZA CONVEYOR OVEN
MODEL CODE :POA 2001 R01
Description