7-Port Powered
USB HUB
Installation and Operating Instructions
ap3008-bun
Important! please read these instructions carefully
CPIN002452
CPIN002452
Arlec Australia Pty. Ltd. ACN 009 322 105 (“Arlec”) gives the Warranty.
Arlec’s telephone number, address and email address are:
Customer Service: (03) 9982 5111
Building 3, 31 – 41 Joseph Street, Blackburn North, Victoria, 3130
Blackburn North LPO, P.O. Box 1065, Blackburn North, 3130
Email: [email protected]
ANTSIG is proudly produced by ARLEC Australia Pty. Ltd.
Visit us at: www.ANTSIG.com
© This instruction leaflet is subject to copyright and must not be reproduced, copied or otherwise used in any
way or for any purpose without the consent in writing of the owner.
teChniCal SpeCifiCationS
USB Hub:
7-port
Standards:
Compatible with USB1.1 and 2.0
Data Speed:
Low: 1.5 Mbps, Full: 12 Mbps, High: 480Mbps
USB Ports:
7x A-type male USB ports and one B-type female USB host port
LEDs:
1x LED power indicator
Power:
Bus Power (Without Power Adaptor): 5V DC,
(Shared Max current of PC USB port typically 500mA)
Self Power (With Power Adaptor):
5V DC, 2A
Storage Temperature: -10°C - 40°C
Working Temperature: 0°C - 40°C
troubleShooting
What to do if the USB Hub not seen
Check whether you have installed all the Windows® updates and relevant patches relating
to the USB. Check Microsoft’s website for the relevant updates.
Warranty
Arlec guarantees this product in accordance with the Australian Consumer Law.
Arlec also warrants to the original first purchaser of this product (“you”) from a retailer that this product will be free of defects in materials and workmanship
for a period of 12 months from the date of purchase; provided the product is not used other than for the purpose, or in a manner not within the scope of the
recommendations and limitations, specified by Arlec, is new and not damaged at the time of purchase, has not been subjected to abuse, misuse, neglect or damage,
has not been modified or repaired without the approval of Arlec and has not been used for commercial purposes (“Warranty”).
If you wish to claim on the Warranty, you must, at your own expense, return the product, and provide proof of original purchase and your name, address and telephone
number, to Arlec at the address below or the retailer from whom you originally purchased the product within 12 months from the date of purchase.
Arlec will (or authorise the retailer to) assess any claim you may make on the Warranty in the above manner and if, in Arlec’s reasonable opinion, the Warranty applies,
Arlec will at its own option and expense (or authorise the retailer to) replace the product with the same or similar product or repair the product and return it to you or
refund the price you paid for the product. Arlec will bear its own expenses of doing those things, and you must bear any other expenses of claiming on the Warranty.
The Warranty is in addition to other rights and remedies you may have under a law in relation to the product to which the Warranty relates.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
AP3008-BUN_ Instructions.indd 2
20/06/12 11:44 AM
