LAVA
Electronics
Inc
.
Tech
Support
:
909
-
235
-
6611 www.lavasat.com
E
-
:
support
@
lavasat
.
com
RVHD
-
2000
OMNIPRO series
AM
:
520
-
1719KHz FM
:
47
-
230MHz
UHF
:
470
-
862MHz
Gain
:
30dBPower
Supply: DC 12V==50mA
Step 1: Choosing a Location:
Make sure the mounting location has a
sufficient flat area so the antenna’s mounting stand can be mounted flat.
Step 2: Drilling holes:
Use the mounting bracket as a template to determine
where to drill the holes.
Step 3: Assembling the Antenna:
Rotate the antenna’s locking nut all the
way down on the base. Gently pull the antenna’s cables thru the mounting
stand. Screw the antenna onto the mounting stand then rotate up the locking
nut to lock the antenna into place.
Step 4: Attaching the Antenna:
Feed the cables thru the hole on the roof.
Put the mounting bolts thru the holes in the mounting stand. On the interior,
place the mounting bracket then use the nuts to secure the antenna.
Step 5: Wiring:
Connect the cables from the antenna to distribution wall
plate and to the radio. Connect the power cables from the distribution wall
plate according to the diagram below.
