8 Operating the Instrument
34
C76IB003EN-E
To set the time
1. Tap <Menu> and select
"Setup > Control Panel > Screen Saver"
to open
the settings for the screen saver.
2. Use the check box to activate/deactivate the option:
•
Automatically switch off display after ... minutes.
3. Enter a value between 1 and 300 minutes.
4. Tap <OK> to save the changes.
To deactivate the screen saver
There are two ways to deactivate the screen saver:
•
Tap the screen or use any other input device (external touch screen, mouse,
or keyboard).
•
Start a measurement via any interface (Ethernet or RS-232).
8.6
Activating/Deactivating the Feedback Beeps
If both feedback beep functions are activated, the instrument beeps upon every
successful touch screen or softkey action, mouse click and bar code reader input
as well as after the completion of a measurement.
1. Tap <Menu> and select
"Setup > Control Panel > Feedback Beeps"
.
2. Activate/deactivate the feedback beep option for beeping when a screen
item or key is touched.
3. Activate/deactivate the feedback beep option for beeping when a
measurement was completed.
4. Tap <OK>.
8.7
Logging On/Off
When delivered, the instrument is freely accessible without password.
If user accounts are installed and passwords set, you may have to pass a logon
procedure after switching on the instrument.
To log on
1. Tap on the user indicator on the right side of the header of the main screen to
open the "Logon" dialog.
