Anton Paar 84138, Инструкция по эксплуатации

Страница: 51 / 162

C96IB01 51
EN
9.9 Exporting Measuring Data to a PC
Exporting measuring data to a PC does not require a special program. You just need
a PC with an infrared interface or a PC with an IrDA USB adapter installed and
connected. Contact your Anton Paar representative if you need an IrDA USB adapter
for your PC.
To set the data export format
1. Press <Menu> and select "Setup > Import / Export > Data Format" .
You can choose between different format options.
2. Choose the data format, <CSV> or <TXT>, and press <OK>.
3. Choose the delimiter, <,> [comma], <;> [semi-colon] or </> [slash], and press
<OK>.
4. Choose the decimal point, <.> [point] or <,> [comma], and press <OK>.
Your changes are accepted and used for the following data export. The settings
for delimiter and decimal point are only applied with CSV data exports.
To export a measured value
1. If your PC has no IrDA interface, install the IrDA USB adapter on your PC.
2. Press <Menu> and select "Measuring Data" .
3. Select the measured value required for export using the arrow keys.
4. Press <Export>.
5. Hold the IrDA interface of DMA 35 to the IrDA interface of the PC to establish
communication between the two instruments.
6. Select <Export Selected> to export the selected measured value to the PC.
A dialog window appears on the PC asking if you want to accept the file.
7. Click <Yes>.
The measured value is transferred and filed on the desktop.
To export all measuring data
You have two options for exporting all measuring data to a PC.
Option 1:
1. If your PC has no IrDA interface, install the IrDA USB adapter on your PC.
2. Press <Menu> and select "Measuring Data" .
3. Press <Export>.
4. Hold the IrDA interface of DMA 35 to the IrDA interface of the PC to establish
communication between the two instruments.