Anton Paar 84138, Инструкция по эксплуатации

Страница: 38 / 162

38 C96IB01
EN
9.2.6 Selecting a Method
1. Press <Menu> and choose "Methods > Select Method" .
All stored methods are displayed.
2. Select the preferred method and press <OK>.
The name of the measuring method is displayed on the main screen and the
following measurements are performed according to the selected method.
9.3 Assigning a Sample ID
You can assign different sample IDs to samples. This function helps to uniquely
assign measuring data to
• samples (sample identification)
• users who performed the measurement (user identification)
• the measuring point where the sample was taken etc.
You can save up to 100 different sample IDs. To see how many of the 100 storage
places are still available, go to the menu
"Device Information" (see Chapter 11.3).
9.3.1 Entering the Sample ID
1. Press <Menu> and select "Sample-ID > Enter new ID" .
2. Use the arrow keys to enter the first letter of the ID and press <OK>.
3. Repeat this procedure for the other letters in the ID.
4. Browse with the arrow keys to the tick symbol and press <Save>.
TIP If you keep an arrow key pressed, the cursor automatically stops at the tick
symbol.
TIP If you enter a new sample ID and only select the tick symbol without
entering letters for the ID, the sample ID is automatically given the name
<empty>. The 4-digit consecutive number of the measuring data is then
used as the ID.