Anton Paar 84138, Инструкция по эксплуатации

Страница: 26 / 162

26 C96IB01
EN
8.7 Allocation of the Softkey Function
On the front side of DMA 35 are two softkeys. When the instrument displays the main
screen, the left softkey always takes you to the main menu. The right softkey can be
allocated with one out of three predefined functions. The allocated function is only
available in the main screen.
The functions available are "RFID 2 ", "Store" and "Print".
1. Press <Menu> and select "Setup > Softkey" .
2. Select the preferred setting (RFID, Store, Print) and press <Save>.
8.8 Password Protection
You can protect your instrument with a password according to your demands. If the
password protection is enabled, the password needs to be entered before changing
the settings, before performing an adjustment and before selecting a measuring unit.
For performing measurements as well as entering, changing or deleting measuring
methods or sample IDs no password entry is required.
You can anytime change the password later on or disable password protection
entirely.
To set a password
1. Press <Menu> and select "Setup > Set Password" .
2. Enter the first number of your password using the arrow keys and press <OK>.
3. Repeat this procedure to set the other numbers of the password and press
<Continue>.
RFID Enables programming and reading of RFID tags for the purpose
of quick sample identification. The method or sample ID
allocated to the tag will automatically be used for the following
measurements.
Store
Provides the same functionality as the key on the back of
the instrument and starts and stores a measurement.
Print Enables immediate print-out of the measured value using the
IrDA interface.
2 Only for DMA 35 versions with RFID interface