Anthro
®
Space Pal
TM
(Tall)
Assembly Instructions
Thank you for buying our Products!
Before beginning assembly of your Anthro Space Pal,
please take a moment to review the parts listed below
to verify that your shipment is complete.
Additionally, we have included the following items:
Hex Driver
5
/
32
" ........................................ Qty. 1 ......................... 375-5000-00
Hex Driver Bit
5
/
32
" ................................. Qty. 1 ......................... 375-5003-00
Hex Key
1
/
4
" ............................................... Qty. 1 ......................... 375-5024-00
Wax Stick ................................................... Qty. 1 ......................... 175-5034-00
8 oz. Rubber Mallet ................................. Qty. 1 ......................... 375-5022-00
It may be helpful to have a second person to assist in this
assembly procedure.
Questions? 1-800-325-3841
01 – Additional Shelf ........................ Qty. 1 .................. 100-6366-xx
02 – 3 X 3 Shelf Brackets ............... Qty. 8 .................. 225-5397-xx
03 – Large Shelf ................................. Qty. 1 .................. 100-6365-xx
04 –
3
/
4
” Wood Screws .................... Qty. 32 .............. 325-5106-00
05 – Caster Screws ........................... Qty. 4 ................. 325-5052-00
06 – 1.75” Large End Caps ............ Qty. 2 .................. 175-5021-xx
07 – Caster Inserts ........................... Qty. 4 ................. 525-1000-00
08 – 2
3
/
8
” Locking Casters ................ Qty. 2 ................. 150-5003-03
09 – Base Tube Screws ..................... Qty. 4 ................. 325-5000-00
10– 2
3
/
8
” Non-Locking Casters ....... Qty. 2 ................. 150-5002-03
11– Base Tubes ................................. Qty. 2 .................. 125-5195-xx
Enclosed Parts List
12– Base Bracket ............................. Qty. 1 .................. 225-5396-xx
13– Bracket Screws ......................... Qty. 2 ................. 325-5136-00
14– 23.875” Vertical Legs .............. Qty. 4 .................. 125-5020-xx
15– 20.1” Extension Tubes ............ Qty. 4 .................. 625-5549-xx
16– 1.5” Small End Caps ............... Qty. 4 .................. 175-5020-xx
17– Support Screws ........................ Qty. 24 .............. 325-5010-00
Detailed views of all Hardware is provided with each Assembly Step.
All Fastener quantities listed here are the minimum needed
for your Cart assembly. There may be a few extra
Fasteners included, which are not counted in the Parts List.
Anthro
®
Corporation Technology Furniture
®
10450 SW Manhasset Drive Tualatin, Oregon 97062
SAVE THESE INSTRUCTIONS!
anthro.com
Step 8
NOTE: It may be helpful to have a second person assist in
this assembly Step.
Lay the remaining Leg assembly on the floor as shown.
Carefully rotate the Shelf Assembly (from Step 7) onto
the Leg Assembly.
Loosely attach the Shelf Brackets (on the Additional
Shelf) to Hole 2 from the top of the Extension Tubes
using three Support Screws per Bracket.
Finally, loosely install three Support Screws into both
Shelf Brackets (on the Large Shelf).
Step 9
Carefully rotate your Cart onto the Castors. Align the
Base Bracket with the rear of the Base Tubes. Install one
Bracket Screw through each Base Bracket opening into
the Base Tube Star Nuts.
Tighten all Support, Base Tube, and Bracket Screws.
Step 10
Finally, pop the four 1.5” Small End Caps into the Extension
Tubes and two 1.75” Large End Caps into the Base Tubes.
Congratulations! Your assembly is complete.
Please return the enclosed Registration Card to receive
our product updates, new catalogs, and sale flyers.
Thank you for choosing Anthro!
01
02
15
03
14
04
05
06
07
08
09
10
11
12
13
1.5” Small End Cap
1.75” Large End Cap
Self Threading Screw
325-5010-00
(
5
/
16
-18 X 1”) Bracket Screw
325-5136-00
16
17
Locking Caster
TECHNOLOGY FURNITURE
®
March 2002 Rev. A
Questions?
1-800-325-3841
Large Shelf
Additional Shelf