Anthos SMART TOUCH R7, Руководство по эксплуатации

Страница: 30 / 90

30 30 EN
R7
- OPERATING INSTRUCTION
5.1.1.2.7. Chronometer
This setting is shared by all users.
From the GENERAL SETTINGS menu touch the icon button to
access the CHRONOMETER SUBMENU.
• To change the various data displayed , touch the relative icon buttons
or .
NOTE: the time can bet set from 00:00:00 to 10:59:59.
• Once you have set the time, touch the icon button to start the
countdown.
NOTE: at this point, you can exit this menu by touching the icon
button without interrupting the countdown.
• To interrupt the countdown, touch the icon button .
NOTE: at this point, touching the icon button you can reset
the chronometer to the last time set.
• When the set time runs out, the dental unit emits an intermittent signal and
the CHRONOMETER menu is once again shown on the TOUCH DISPLAY.
To interrupt the intermittent signal, touch the icon button or any
button on the console.
NOTE:
the last time set remains stored.
5.1.1.2.8. Personalization of favourite keys
This submenu allows you to select the function to attribute to the 3 lower
icons visible in the main page.
This setting is shared by all users.
From the GENERAL SETTINGS menu touch the icon button to access
the FAVOURITE BUTTONS CUSTOMISATION submenu where you can
view the 3 positions modifiable with the icons of the functions currently set.
• To change the function for a specific position, touch the relative icon buttons
or .
• The settable functions are the following:
BIOSTER S DISINFECTION CYCLE SETTING
(position P1 only)
FLUSHING CYCLE SETTING
(position P1 only)
Hydro unit settings
Foot control adjustment
Operating lamp adjustment
Other settings
Time and date setting
Chronometer
Language selection
Independent water supply selection/deselection
• To confirm the selected settings, exit this submenu by touching the icon
button .