22
22
EN
R7
- OPERATING INSTRUCTION
5.1.1.
User interface
When turned on, the dental unit performs a brief autodiagnosis cycle that ends
when the main screen containing the name of the operator last set is displayed.
As of this moment a number of settings can be edited from user-friendly
menus (see diagram).
Menu scrolling control.
• To access the setting menu, touch the icon button
.
• To access the various submenus, touch the relative icon button.
• To change a setting in a menu, touch the relative icon button.
•
To change a numerical value in a menu, touch the icon buttons
or
.
•
To exit from a menu, touch the icon button
.
Layout of the user interface menu.
The user interface menu is structured as shown in the diagram and includes
the following menus:
5.1.1.1.
Operator selection.
5.1.1.2.
GENERAL SETTINGS.
5.1.1.2.1.
HYGIENE SYSTEM SETTING.
5.1.1.2.1.1. BIOSTER disinfection cycle setting.
5.1.1.2.1.2. FLUSHING cycle setting.
5.1.1.2.2.
HYDRO UNIT SETTINGS.
5.1.1.2.2.1. Bowl water delivery setting.
5.1.1.2.2.2. Cup water delivery setting.
5.1.1.2.2.3. Bowl movement control.
5.1.1.2.3.
FOOT CONTROL ADJUSTMENT.
5.1.1.2.4.
OPERATING LAMP ADJUSTMENT.
5.1.1.2.5.
OTHER SETTINGS.
5.1.1.2.6.
TIME AND DATE SETTING.
5.1.1.2.7. CHRONOMETER.
5.1.1.2.8.
FAVOURITE BUTTONS CUSTOMISATION.
5.1.1.2.9.
OPERATOR DATA ENTRY.
5.1.1.2.10.
LANGUAGE SELECTION.
Error messages.
During the initial self-diagnostic cycle, the dental unit may detect some mal-
functions in the internal system.
In this case, an error message is shown on the display (see paragraph 10)
which remains visible until the operator touches the TOUCH DISPLAY.
If the malfunction is not hazardous, the dental unit will continue to operate.
Stand-by mode.
The dental unit goes into power saving mode (stand-by) after approximately
10 minutes of non-use; this mode is shown by the ANTHOS logo on the
control panel display.
Normal operating conditions are restored as soon as any operation is
performed.
Содержание SMART TOUCH R7
