Anthem Statement D2 Скачать руководство пользователя страница 70

Страница: 70 / 102

THX Options

Press THX

Press THX Twice

THX Surround EX

Processing – Re-EQ, Timbre Matching
Output channels – All

RE-EQ: On/Off

using MCK (or N/S keys)

THX Options

Press THX

Press THX Twice

THX Cinema

Processing – Re-EQ, Timbre Matching, Adp.Decorrelation
Output channels – All

RE-EQ: On/Off

using MCK (or N/S keys)

4.8.8

Mode and THX Operation for Dolby Digital 5.1 and 6-Ch S/E

– To make all modes available, turn THX Off.

4. OPERATION

continued …

Dolby Digital EX (6.1)

Dolby PLIIx Movie (7.1)

None (5.1)

If THX Sur EX
is selected,
mode changes
to Dolby D EX.

Dolby PLIIx Music (7.1)

THX Cinema

Processing – Re-EQ, Timbre Matching, Adp.Decorrelation
Output channels – 5.1 (LF, C, RF, RS, LS, Sub)

THX Ultra2 Cinema

Processing – Re-EQ, Timbre, Adp.Decor, ASA (Cinema)
Output channels – All

THX Options

Press THX Twice

RE-EQ: On/Off

using MCK (or N/S keys)

Press THX

THX MusicMode

Processing – Timbre Matching, Adp.Decor, ASA (Music)
Output channels – All

THX Games Mode

Processing – Timbre Matching, ASA (Game)
Output channels – All

THX Surround EX

Processing – Re-EQ, Timbre Matching
Output channels – 6.1 (LF, C, RF, RS, Rear, LS, Sub)

DTS Neo:6 (6.1)

THX Options

Press THX

Press THX Twice

THX Cinema

Processing – Re-EQ, Timbre Matching
Output channels – 6.1 (LF, C, RF, RS, Rear, LS, Sub)

RE-EQ: On/Off

using MCK (or N/S keys)

Selections are memorized separately for each source and for Dolby Digital Surround EX-flagged vs unflagged material.

THX Processing:

• Re-Equalization

– De-emphasizes treble. Not applicable to THX MusicMode and THX Games Mode.

• Timbre Matching

– Matches the sound character, or timbre, of the surround channels to the front channels.

• Adaptive Decorrelation

– When the source has one surround channel, adjusts time and phase to restore spaciousness.

• ASA

– Surround and rear channels are processed to provide a wide rear soundstage.

Press MODE

presets are in

setup menu

Cycle through modes and THX using Master Control Knob or

keys on remote control.

Содержание Statement D2







































































































Результаты поиска

Содержание Statement D2

Отзывы:

Бренды по названию

Популярные бренды

Anthem Statement D2, Руководство по эксплуатации

Результаты поиска

Содержание Statement D2

Отзывы:

Бренды по названию

Популярные бренды