Anthem MRC 40 Series Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 22

Anthem MRC 40 Series Скачать руководство пользователя страница 17

Output Signals

Digital Outputs

PowerON_FB

[digital]

The PowerON_FB signal will be high when the main zone is powered on and low when it is off.

PowerOFF_FB

[digital]

The PowerOFF_FB signal will be high when the main zone is powered off and low when it is on.

Mute_FB

[digital]

The Mute_FB signal will be high when the main zone has mute activated and go low when the mute is
deactivated.

DolbyCentreSpread_ON_FB

[digital]

The DolbyCentreSpread_ON_FB will go high when the Dolby Centre Spread function is activated and go be
low when its deactivated. This is controlled via the DolbyCentreSpreadON and DolbyCentreSpreadOFF
commands.

DolbyCentreSpread_OFF_FB

[digital]

The DolbyCentreSpread_OFF_FB will go high when the Dolby Centre Spread function is deactivated and go
be low when its activated. This is controlled via the DolbyCentreSpreadON and DolbyCentreSpreadOFF
commands.

ARC_ON_FB

[digital]

The ARC_ON_FB will go high when the ARC function is activated and go be low when its deactivated.

ARC_OFF_FB

[digital]

The ARC_OFF_FB will go high when the ARC function is deactivated and go be low when its activated.

Z2PowerON_FB

[digital]

The Z2PowerON_FB signal will be high when Zone 2 is powered on and low when it is off.

Z2PowerOFF_FB

[digital]

The Z2PowerOFF_FB signal will be high when Zone 2 is powered off and low when it is on.

Page 17

«
...
15
16
17
18
19
...
»

Содержание MRC 40 Series























Отзывы:

Нет отзывов