ANTENNA EXPERTS
E-mail:
Website: www.antennaexperts.in
AP-240030 2300 – 2600 MHz. 1.8 Meters 30dBi. Gain
INSTALLATION MANUAL – GRID PARABOLIC ANTENNA
NOTICE:
Installation, maintenance or dismounting of the grid parabolic antenna system requires qualified
and experienced personnel.
Antenna Experts
Installation instructions have been prepared and
are meant for skilled personnel only.
Antenna Experts
disclaims any liability or responsibility as a result of improper or unsafe
installation practices.
MATERIALS AND FINISH:
Following materials are used for the fabrication of Grid Parabolic Antennas and its accessories.
Grid Parabolic Reflectors:
6063T6 Aluminum, Silver Gray paints finish.
Mounting Hardware:
All stainless steel, Silver Gray paints finish.
Fasteners:
All Stainless Steel.
Dipole Feed:
All Aluminum with silver gray paints finish outside.
Insulator:
TEFLON.
01 INTRODUCTION:
AP series
grid parabolic antenna reflector consists of numbers of grid members to handle the
maximum wind pressure and supplied in assembled condition for quick installation. When
assembled, the antenna can be mounted on a pipe having a maximum O.D. of 75 mm.
01.1 GRID PARABOLIC REFLECTORS:
Grid parabolic reflector is supplied complete in assembled condition for quick installation.
01.2 UPPER SUPPORT ARM:
Upper support arm is supplied to hold the antenna from top. Upper support arm includes “U” bolt
hardware and a section of “U” type channel with teeth on both edges.
01.3 LOWER SUPPORT ARM:
Lower support arm is supplied with the antenna to hold the antenna from lower side.
Lower
support arm
consists of elevation adjustment mechanism along with “U” bolt hardware and
locking nuts/bolts.
01.4 STOPPER:
A
stopper
is supplied with the antenna to hold the weight of the antenna during installation and
adjustment.
01.5 DIPOLE FEED:
Dipole Feed
having N-Female termination is supplied with the antenna along with feed holder.
02. PACKING LIST
Sl. No.
Item/Description
Quantity
01. Parabolic Reflector in assembled condition.
1 Set.
02. Dipole Feed complete with feed holder.
1 Each.
03. Upper Support Arm complete with “U” bolt.
1 Each.
04. Lower Support Arm complete with “U” bolt.
1 Each.
05. Stopper to hold the Antenna on mounting pipe.
1 Each.
06. Installation Instruction.
1 Each.
07. Test Report.
1 Each.
