Antelope Isochrone 10M, Руководство пользователя

Страница: 4 / 12

Safety notes
To reduce the risk of electrical shocks, fire, and related hazards:
● Do not remove screws, cover, or cabinet. There are no user serviceable parts inside. Refer
servicing to qualified service personnel.
● Do not expose this device to rain, moisture or spillover of liquid of any kind.
● Do not insert foreign objects into the ventilation outlets of the cabinet.
● Should any form of liquid or a foreign object enter the device, do not use it. Switch off the
device and then unplug it from the power source. Do not operate the device again until the
foreign object is removed or the liquid has completely dried and its residues fully cleaned
up. If in doubt, please consult the authorized repair service.
● Do not handle the power cords with wet hands!
● Make sure the device is switched off when plugging/unplugging it to/from the power source.
● When unplugging from the wall outlet always pull the plug, not the power cord.
● Make sure ventilation outlets are not obstructed: putting things on the cabinet or using the
device in a narrow and poorly ventilated place may result in the temperature rising which
could affect its operation or the operation of other closely located components.
● If anything goes wrong, turn off the device first and then unplug the power cords. Do not
attempt to repair the device yourself: consult the authorized service personnel or your
dealer.
Important
About the 15V DC power supply option, please note the following:
● Improper application of the 15V DC power supply may damage the device. When connecting
the 15V DC power cord to the power source, make sure to comply with the circuit diagram
given in this manual so that the correct polarity is applied. If in doubt - consult a competent
electronics technician.
● Make sure the power supply source is capable of producing enough power to meet the
requirements of the device during its peak consumption period (the warm-up) when 40Watts
of power are required.
1
2