Discrete 4 Synergy Core
User Manual
Synergy Core FX Processing and Best-In-Class AD/DA
The Discrete 4 Synergy Core features four 6-transistor discrete preamps for console-grade sound quality. With up to
121dB of dynamic range and sample rates up to 192kHz, its best-in-class AD/DA converters ensure your meticulous
performances are captured with the highest signal quality possible. The Antelope Audio acclaimed 64-bit Acoustically
Focused Clocking algorithm delivers the kind of artifact-free audio once accessible only to the highest-tier studios.
Adding further value to your investment, the Discrete 4 Synergy Core features a compelling library of 36 real-time
studio effects, meticulously modeled after their hardware originals.
1. Safety Notes
To reduce the risk of electrical shocks, fire, and related hazards:
•
Do not remove screws, cover, or cabinet. There are no user serviceable parts inside. Refer servicing to
qualified service personnel.
•
Do not expose the device to rain, moisture or spillover of liquid of any kind. Should any form of liquid or a
foreign object enter the device, do not use it. Switch off the device and unplug it from the power source.
•
Do not use the device until the foreign object is removed or the liquid has completely dried and its residues fully
cleaned up. If in doubt, please consult with the manufacturer.
•
Do not handle the power cables with wet hands! Make sure the device is switched off when plugging and
unplugging it from the power source.
•
Avoid placing any objects on the cabinet or using the device in a narrow and poorly ventilated place. Doing so
could affect its operation or the operation of other closely located components. If anything goes wrong, turn off
the device first and unplug the power.
•
Do not attempt to repair the device yourself: consult authorized service personnel or your dealer.
•
Do not install the unit near any heat sources such as radiators, stoves, or other apparatus (including amplifiers)
that produce heat.
•
Do not use harsh chemicals to clean your Unit. Clean only with specialized cleaners for electronics equipment.
Connect all your devices before powering your Unit. This unit is connected via its power cord to the mains
safety earth. Never operate the unit without this earth connection.
•
Power supply cable should be routed so that it is not likely to be walked on or squeezed by items placed upon
or against it.
•
To completely turn off the device, unplug the power cable first from the outlet and then from the rear panel of
the unit.
•
Both, occasional and continued exposure to high sound pressure levels can cause permanent ear damage via
headphones and monitors.
The device is designed to operate in a temperate environment, with a correct Operating Temperature of: 0-50 °C, 32-
122 °F
