Antari 80378 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 28

Antari 80378 Скачать руководство пользователя страница 21

20

Ordercode: 80378

Antari S-500 Snow Machine

Remote Control Operation

It is possible to use the SC-3 remote control to operate the S-500. The SC-3 remote control is not included
and can be purchased separately (

Fig. 15

01)

Plug the SC-3 remote control into the 4-pin remote control connector IN (15).

02)

Turn the VOLUME control to the left or right to set the pump output level. The adjustment range is
from from low to high.

03)

Turn the FAN control to the left or right to set the fan speed . The adjustment range is from low to
high.

04)

Press the POWER button to activate the SC-3 remote control.

05)

Press the PRIMING button set the maximum pump output level.
●

Pressing this button will override the current setting of the VOLUME control.

●

Use this button in order to flush the system and remove air bubbles, especially after refilling the
snow liquid tank.

06)

Press the MAX FAN button to set the maximum fan speed.
●

Pressing this button will override the current setting of the FAN control.

●

Use this button in order to remove residue in the output nozzle.

«
...
19
20
21
22
23
...
»

Содержание 80378





























Отзывы:

Нет отзывов