Antari 80378, Руководство пользователя, Страница: 14 / 28

13
Ordercode: 80378
Antari S-500 Snow Machine
Control Modes
There are 5 modes: ● Manual
● Timer
● Remote control
● Wireless remote control
● DMX-512 (2CH)
One S-500 (Manual, Timer, Remote control, Wireless remote control)
01)
Leave at least 0,5 meter on all sides for air circulation.
02) Plug the end of the electric mains power cord into a proper electric power supply socket.
03) When the S-500 is not connected with a DMX cable, it functions as a stand-alone device.
04) Please see page 19–22 for more information about Manual, Timer, Remote control and Wireless
remote control modes.
Multiple S-500 fixtures (DMX Control)
01)
Leave at least 0,5 meter on all sides for air circulation.
02) Plug the end of the electric mains power cord into a proper electric power supply socket.
03) Use a 3-pin/5-pin XLR cable to connect the S-500s and other devices.
04) Link the units as shown in Fig. 13. Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
05) Supply electric power: Plug electric mains power cords into proper electric power supply sockets,
starting with the first unit. Do not supply power before the whole system is set up and connected
properly.
Multiple S-500 fixtures DMX Setup
Fig. 13
Note: Link all cables before connecting electric power