Antares CITY'Z FT1000, Руководство пользователя

Страница: 7 / 26

Page 7 on 26
Step3: the indicators lamp of the charger is red when charging. When the lamp changes green,
battery is full. Please stop charging when it is full, or it will affect the battery life.
Step4: finish the charge by covering up the charge port and avoiding the water
3.2 Charging safety tips
Charge at least 5 hours before the first operation.
To maximum the battery life, please charge once per month or after two days of cycling. Please
charge at the suitable temperature.
Not charge on time may cause battery damage. As time went by, the battery power will be totally out,
it is not good for battery.
Please use the batteries, chargers and cables supplied by the original manufacturer and prevent the
battery from being overcharged.
Please ensure that charger cables are connected correctly at ventilated environment.
Please make sure you use it in a dry environment. Chargers or cables will never be allowed to touch
water, because it could lead to electric shocks. Do not touch with wet hands. if any failure occurs
during charging, unplug immediately.
Be sure to pullout of the plug and don’t pull the plug from the cable.
Do not allow the charger or cable to contact sharp or hot items
Perform visual inspection of the charger and charger cables regularly
If the charger cable has obvious damage. Do not use charger to avoid future damage, please contact
for replacement.
Please do not repair the battery, charger or cable independently, please contact us if there is any
problem.
4.1 Ride a electric scooter
This electric scooter is a technology item, instead if walking. If you don’t understand operation
specification and ride, that will lead to unpredictable risk. For the freshman, especially for the first-
time users of electric scooter. We will write in the detail about how to ride electric scooter properly.
And list out the precaution while riding, please make sure you read carefully and ride electric scooter
as required.
4.2 Precautions before cycling
Loss will be caused during cycling and paling, that will affect the performance of the product. So?
before you ride the bike, you must check the following things:
Check whether the parts of bikes are installed and not damaged
Check if brakes are in perfect condition
Check if there is enough electricity
Check if tire is in good condition
Check if scooter handle has any sign of loose, please tighten if has