STE-6104C Series
4-Port Serial Device Server
Quick Start Guide
Version 1.2
November 2018
This document is intended to provide customers with
brief descriptions about the product and assist customers
to get started. For detailed information and operation of
the product, please refer to the product user’s manual in
the product CD or ANTAIRA website.
1. P
ACKAGING
Check whether your package contains following items:
◎
STE-6104C
◎
Quick Start Guide with Warranty Card
◎
Product CD
◎
7-pin Terminal Block ( 2ESDV-07P) x1
2. H
ARDWARE
D
ESCRIPTION
NOTE:
1. STE-6104C
(RS-232/422/485)
2.
Press the
Default
button of STE-6104C to reset to the
default value
Figure 2.1. STE-6104C Series interfaces
LED Indicators:
Name
Color
Status
Description
Power
Green
Off
Power is not connected
On
Power is connected
LAN
Green
Off
Ethernet Disconnected
Blinking
Data is transmitting on
Ethernet for 100Mbps
Orange
Blinking
Data is transmitting on
Ethernet for 10Mbps
COM
Green
Off
No data is transmitting on
COM port
Blinking
Data is transmitting on
COM port
RUN
Green
Off
System is not ready or
halt
Blinking
AP firmware is running
normally
Installation Procedures:
Step 1
: Connect STE-6104C to power source
Step 2
: Connect STE-6104C to the Ethernet network. Use
a standard straight-through or cross-over Ethernet
cable Always make sure the PC is on the same
network subnet as STE-6104C.
Step 3
: Connect STE-6104C’s serial port to a serial
device.
Step 4
: Mount STE-6104C to a Din Rail.
3
S
OFTWARE
S
ETUP
Default Network Setting:
Default User Name/Password:
LAN1 IP:
10.0.50.100
User Name:
admin
Gateway:
10.0.0.254
Password
Version 455 and earlier
null (leave it blank)
Version 456 and later
“default”
Subnet:
255.255.0.0
LAN2 IP
：
192.168.1.1
Gateway:
192.168.1.254
Subnet:
255.255.255.0
Version 1.1 March, 2011
