Antaira Technologies
LNX-C501G-SFP Series
5-Port Industrial Compact Gigabit Unmanaged Ethernet Switch,
4*10/100/1000TX and 1*100/1000 SFP Slot
Quick Installation Guide
Version 1.0
(May 2022)
Tel: 1-844-268-2472
Fax: 1-714-671-9944
www.antaira.com
19020000000195
Package Checklist
The package contains the following items:
•
1 – Quick installation guide
•
1 – LNX-C501G-SFP(-T)
•
1 – Wall mounting bracket set with screws
•
1 – DC cable –18 AWG & DC jack 5.5 x 2.1mm
•
1 – Dust cover set
Front Panel Layout
Product Overview
System Interface/Performance
•
All RJ45 ports support the auto MDI/MDI-X function
•
Embedded 4*10/100/1000Tx RJ45 ports and 1*100/1000
SFP slots
•
Store-and-Forward switching architecture
•
8K MAC address table
•
Supports 10Kbytes jumbo frame
•
1Mbits memory buffer
Power Input & Connection
•
DC 12 to 48V redundant power, with a 6-pin removal
terminal block
•
It is recommended to use a UL listed industrial power supply
Operating Temperature
•
Standard operating temperature model: -10°C to 65°C
•
Extended operating temperature model: -40°C to 75°C
Case/Installation
•
IP40 protection
•
DIN-Rail and wall mount design
LED Indicators
LED
Color
Description
Power 1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
Power 2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
Fault
Red
Off
No event happened
On
1. Power input 1 or 2 is inactive
2. Port link-down / Broken
SFP Port
LNK/ACT
Speed
Green
On
Connected to network, 100 or 1000Mbps
Flashing
Networking is active
Off
Not connected to network
LAN Port 2~5
LNK/ACT
Speed
Green
On
Connected to network, 1000Mbps
Flashing
Networking is active
Off
Not connected to network
Green
On
Connected to network, 10/100Mbps
Flashing
Networking is active
Off
Not connected to network
DIP Switch
The DIP switch is used to control SFP speed.
ON
OFF (Default)
Control SFP speed at 100Mbps
Control SFP speed at 1Gbps
NOTE:
The device will reboot when the dip switch setting is
changed.
SFP# 1 – 100/1000
SFP# 1 – LED for Link/Activity Status
LAN# 2~5 LED for Link/Activity Status
10/100Mbps
LAN# 2~5 – 10/100/1000Tx RJ45
LAN# 2~5 LED for Link/Activity
Status 1000Mbps
DIP Switch Setting for SFP Speed
Grounding Screw
LED for Power 1, Power 2, Fault
6-Pin Removal Terminal Block (Power Input)
