48
System Information
Assign the system name and location and view the system information
System Name:
Assign the system name of the switch (The maximum length is 64
bytes)
System Description:
Describes the switch.
System Location:
Assign the switch physical location (The maximum length is 64
bytes).
System Contact:
Enter the name of contact person or organization.
Firmware Version:
Displays the switch’s firmware version
Kernel Version:
Displays the kernel software version
MAC Address:
Displays the uni que har dware addr ess as signed by m anufacturer
(default)
And than, click
Apply
button.
System information interface
IP Configuration
User can configure the IP Settings and DHCP client function in here.
DHCP Client:
Enable or disable the D HCP c lient function. When DHCP c lient
function i s e nabled, t he i ndustrial s witch w ill be assigned an IP a ddress f rom t he
network DHCP server. The default IP address will be r eplaced by the assigned IP
address on DHCP server. After user click
Apply
button, a popup dialog shows up. It
