Antaira Technologies
LNX-0601G-SFP Series
6-Port Industrial Gigabit Unmanaged Ethernet Switch,
w/5*10/100/1000Tx Ports + 1*100/1000 SFP Slot
Quick Installation Guide
Version 1.0
(May 2018)
Package Check List
The package contains the following items:
⚫
1
– Quick installation guide
⚫
1
– LNX-0601G-SFP(-T)
⚫
1
– Wall mounting bracket set with screws
⚫
1
– DC cable –18 AWG & DC jack 5.5 x 2.1mm
⚫
1
– RJ45 dust cover set
Front Panel Layout
6-Pin Removal Terminal Block (Power Input)
Grounding Screw
LED for Power 1, Power 2, and Fault
SFP# 6
– 100/1000 SFP Slot
SFP# 6
– LED for Link/Activity
Status 100/1000 SFP Slot
DIP Switch
LAN# 1~5
– LED for Link/Activity
Status 1000Mbps
LAN# 1~5
– LED for Link/Activity
Status 10/100Mbps
LAN# 1~5
– 10/100/1000Tx RJ45
Top Panel View
LNX-0601G-SFP series top panel is equipped with one 6-pin
removal terminal block connector for dual DC power inputs
(12~48VDC).
Power line EFT protection: 3,000VDC; Ethernet ESD
Protection: 4,000VDC
Power Input & Connection
DC 12 to 48V redundant power, with a 6-pin removal
terminal block
It is recommended to use a UL listed industrial power supply
Operating Temperature
Standard operating temperature model: -10°C to 70°C
Extended operating temperature model: -40°C to 75°C
Case/Installation
IP30 protection
DIN-Rail and wall mount design
LED Indicators
6-Pin Removal Terminal Block (Power Input)
Product Overview
System Interface/Performance
Grounding Screw
Quick Installation
Ethernet Ports
RJ45 Ports (Auto MDI/MDIX)
All RJ45 ports are auto-sensing for 10Base-T, 100Base-TX or
1000Base-T device connections. Please follow the wiring pin
assignment table below for Ethernet port installation.
Tel: 1-844-268-2472
Fax: 1-714-671-9944
19020000000063
All RJ45 ports support the auto MDI/MDI-X function
Ethernet connectivity 5*10/100/1000Tx RJ45 ports and
1*100/1000 SFP slot
Store-and-forward switching architecture
Broadcast storm protection
8K MAC address table
Jumbo frame supports: 10K
Port break alarm mask
LED
Color
Description
Power 1
Green
On
Power input 1 is active
Off
Power input 1 is inactive
Power 2
Green
On
Power input 2 is active
Off
Power input 2 is inactive
Fault
Green
On
System is ready
Off
System is booting
Red
On
Fault alarm
Off
System is in normal state
LNK/ACT
(SFP Port)
Green
On
Connected to network
Flashing
Networking is active
Off
Not connected to network
LAN Port 1~5
(Upper LED)
Green
On
Connected to network, 1000Mbps
Flashing
Networking is active
Off
Not connected to network
LAN Port 1~5
(Lower LED)
Green
On
Connected to network, 10/100Mbps
Flashing
Networking is active
Off
Not connected to network
